SR3608 Equipment Teaching Electrician Trainer Industrial PLC Unit Product Manual
1. Product Overview
1.1 Overview
This training device is Siemens S7-1200CPU module. Through relevant experiments, you can be familiar with the basic use and programming methods of S7-1200 PLC, the use of programming software, etc. Cultivate the corresponding knowledge and skills of students, suitable for teaching and skills training and assessment of related majors in vocational schools, vocational schools, secondary vocational schools and technical schools.
1.2 Features
(1) All the input and output terminals of the PLC module are led out to the panel through the transfer terminal, and connected with the 2mm safety electrical cable.
(2) The PLC module selects Siemens PLC, provides digital input 8 in 14 output, analog input 6 in 2 output, supports RS232 and RS485 communication.
(3) The module is equipped with a DC 0-30V voltmeter.
(4) Equipped with 2 sets of analog DC0-10 output.
2. Performance parameters
(1) Input power: single-phase three-wire system 220V ± 10% 50Hz
(2) Dimensions: 297mm × 230mm × 80mm
(3) Total capacity: <500VA
(4) Weight: <100kg
(5) Working conditions: ambient temperature -10 ℃ ～ + 40 ℃ relative humidity ＜ 85% (25 ℃)
3.1 Module power switch
The power switch can also indicate the power status.
3.2 Module digital input
The module contains 8 digital inputs, which can be connected to signal input components such as buttons
3.3 Module analog input
The module contains 6 analog input points, which can be connected to voltage analog signals or current analog signals.
3.4 Module DC24V output
The module contains a set of DC24V output, which can provide DC24V power for the sensor.
3.5 Module DC0-30V voltmeter
The module contains a DC0-30V voltmeter, which can measure DC0-30V voltage.
3.6 Voltage analog signal DC 0-10V output
This module contains 2 sets of DC 0-10V DC voltage analog signals, which can be used as PLC DC voltage analog input signals.
3.7 RS232 communication module
This module contains RS232 communication module, which can be used as PLC for RS232 communication.
3.8 RS485 communication module
The module contains RS485 communication module, which can be used as PLC for RS485 communication.
3.9 Module relay output
The module contains 14 relay outputs, which can be connected to relay outputs.
3.10 PLC
The overall exposed Plc module allows students to visually observe the status of PLC input and output points.
3.11 Analog output
The module contains 2 analog input points, which can output voltage analog signal or current analog signal.
3.12 supporting devices
(1) 1 communication line
(2) 1 CD of PLC programming software
(3) 25 pieces 2mm safety electrical cable
(4) 1 power cord
4. Can complete the training content
(1) Computer and PLC communication training
(2) PLC programming training
(3) Computer monitoring PLC status training
(4) PLC analog input training
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
Product Tags:
|
|
Teaching PLC Trainer Kits Mechanical Engineering Lab Equipment S7-1200CPU Images
|
